Top 5 Rotary Washing Line Base in UK
After a lot of research, we found the bases below. They may work with some rotary washing lines. However, any base are not specifically designed for rotary washing lines, especially for high load, so they are not the first option I would recommend..
If you already have a rotary washing line, a proper rotary washing line spike is usually a better choice. You can choose between screw-in and hammer-in spikes, depending on your ground. If you need something portable, a portable washing line may also be a better option.
However, if you need a base for your rotary washing line, first check the diameter of the pole. Most are 32mm, 40mm or 50mm. Then choose one option from below:
We may earn a small commission if you buy through our Amazon links, at no extra cost to you. Prices and reviews were checked when we wrote this article and can change, so please check Amazon for the latest details.
Ram® 10kg Parasol Base
Best for small weight
- Cost
- ~ £19
- Reviews
- ★ 4.2/5 (1.3k+)
- Hole diameter
- 35 mm to 48 mm
- Material
- Steel
The Ram® 10kg Parasol Base is a lightweight option that may work with some smaller rotary washing lines. It has an adjustable pole holder suitable for poles from 35mm to 48mm, which covers some common rotary washing line sizes. The base weighs 10kg and measures approximately 42.5 × 42.5 × 31.5cm. It has a black rattan-effect cement base with an iron tube. However, as it is designed for parasols rather than rotary washing lines, check your washing line pole size and stability before using it.
JSH 73kg Base
Best for heavy weight
- Cost
- ~ £62
- Reviews
- ★ 4.3/5 (43+)
- Hole diameter
- 38 mm to 48 mm
- Material
- High-density polyethylene (plastic)
The JSH Heavy Duty Garden Umbrella Base is a much heavier option that may suit larger rotary washing lines with a 38mm or 48mm pole. It is made from durable high-density polyethylene and can be filled with water or sand, reaching around 48.5kg with water or 73.5kg with sand. It also has two wheels, making it easier to move when needed. However, it is designed for garden parasols, not rotary washing lines, so make sure the pole fits securely and the base provides enough stability before using it.
ZOPPER 9kg Parasol Base
Best for small weight & design lovers
- Cost
- ~ £23
- Reviews
- ★ 4.6/5 (58+)
- Hole diameter
- Up to 55 mm
- Material
- Cast iron effect
- Popularity
- 400+ bought in the past month (when we wrote this)
The ZOPPER 9kg Parasol Base is a compact and decorative option that may work with some smaller rotary washing lines. Its wide, round design provides a stable base, while the cast iron-effect finish gives it a more attractive look for gardens, patios and balconies. It weighs 9kg and is designed for outdoor use, with a weather-resistant build. The manufacturer states that it can support poles up to 55mm, but you should check your rotary washing line pole diameter and make sure it fits securely before using it.
Qohoio 25kg Base
Designed for rotary washing lines
- Cost
- ~ £88
- Hole diameter
- Not listed
- Material
- Granite
The qohoio Parasol Base Granite Rectangular 25 kg is a heavy-duty, rust-resistant base weighing 25 kg. It can be used as a garden parasol base, a rotary washing line anchor, and a clothesline support. It measures 52 x 43 x 14.5 cm and has a stylish granite finish. It is built to withstand outdoor weather all year round and only needs a simple wipe clean. It costs around £88 on Amazon (at the time of writing) and combines practical strength with an attractive look for reliable outdoor stability.
Bulliing Screw Fixed Base
Best for permanent setup
- Cost
- ~ £30
- Reviews
- ★ 5.0/5 (4+)
- Hole diameter
- 32 / 34 / 38 mm
- Material
- Steel
The Bulliing Screw Fixed Base is a more suitable alternative for a permanent rotary washing line setup because it is designed for 32mm, 34mm and 38mm poles. Made from durable steel with a powder-coated surface, it is designed to resist rust, corrosion and wear. Its compact design also saves space compared with larger freestanding bases. However, as it is still marketed mainly as a parasol base, check that your rotary washing line pole fits securely before installation.
FAQs
What Size Base Do You Need for a Rotary Washing Line?
The most important thing to check is the diameter of your rotary washing line pole.
Do not choose a base just because it says it can hold a parasol. Measure your rotary washing line pole first and compare the measurement with the base’s pole opening.
For example, if your rotary washing line has a 32mm pole, a base designed for 38mm–48mm poles may not hold it properly without a suitable sleeve or insert.
You should also consider the weight of the base. A small 9kg or 10kg base may be fine for a lightweight setup, but a large rotary washing line with lots of wet clothes can place much more load on the base.
Are Parasol Bases Safe for Rotary Washing Lines?
Parasol bases are not specifically designed for rotary washing lines, so you should use caution.
A rotary washing line can experience sideways movement, especially when clothes are hanging from the lines or when there is wind. A base that works well for a parasol may therefore not provide the same stability for a rotary airer.
For permanent outdoor use, a proper rotary washing line spike installed securely in the ground is generally a more suitable setup.
If you still want to use a base, make sure:
- The pole fits securely inside the base.
- The base is heavy enough for your setup.
- The rotary washing line is not overloaded.
- You avoid using it in strong winds.
Rotary Washing Line Base vs Spike
A rotary washing line spike is designed specifically to hold a rotary washing line pole in the ground. It is usually the better option if you have a suitable garden area where you can install one.
A base can be useful when you cannot or do not want to put a spike into the ground. However, you need to pay more attention to stability because the whole base sits above the ground.
If you need to move your washing line regularly, a portable washing line may be more suitable than trying to use a heavy parasol base.
How to Make a Base for a Rotary Washing Line at Home
Yes. If you want to make a DIY base for a rotary washing line at home, the easiest and strongest option is a concrete base with a metal or plastic sleeve in the centre.
You will need:
- Cement
- Sand and gravel
- Water
- A strong PVC or metal pipe, slightly wider than the pole
- Spade
- Bucket or mixing tray
- Spirit level
- Tape measure
7 steps to make a base for your rotary washing line
- Choose the location: Pick a flat area with enough space for the rotary washing line to open fully.
- Dig a hole: Make a hole around 40–50 cm deep and about 25–35 cm wide. The exact size depends on the size and weight of your rotary line.
- Make the sleeve: Put a strong PVC or metal pipe vertically in the centre. The rotary washing line pole should fit inside it, but not be too loose.
- Mix the concrete: Mix cement, sand, gravel and water until you have a firm concrete mixture.
- Fill around the sleeve: Pour the concrete into the hole while keeping the sleeve perfectly vertical. Check it with a spirit level from different directions.
- Let it cure: Leave the concrete to harden properly. Do not put the rotary washing line in it immediately. Ideally, allow several days before putting a heavy line under load.
- Fit the washing line: Once the concrete is properly cured, place the rotary washing line pole into the sleeve.
